After buying a house at home, we all want to decorate the kitchen attractively. The kitchen is very important in our daily life, so it is very important in the choice of decoration materials. Especially in the current market, many owners spend a lot of energy to choose decoration materials in the decoration materials of the kitchen. Next to Beijing Fumei home fire protection board company, let's have a look at the blister board and fire protection board What's the difference between boards?

　　首先要滿足防火板:防火板的組成部分:它是由幾層牛皮紙,包裝紙,確保樣品的強度取決于其表面顏色+ +顏色紙紙本文是某種特殊的皮膚,這是紫外線測試后,可以在紫外線下十多年陽光不掉色,耐熱性能相對較好和雙牛皮紙和彩色相紙抑制后,他們每一個泡沫浸漬三聚氰胺水溶液。消化吸收這種水溶液中的東西，其耐磨性、劃痕性、清潔性、耐腐蝕性、耐酸性會好得多。也就是說,裝修市場上通常制造商的一些雙飾面板也叫三聚氰胺板或一次擠壓成型板浸三聚氰胺板材水溶液,其牛皮紙只是薄,熊緩沖性能指標有點差;三聚氰胺平板水溶液的吸水性較差，耐磨性、耐劃痕性等性能指標稍差，但其流平性很好。

　　First of all, it should meet the requirements of fireproof board: the component of fireproof board: it consists of several layers of kraft paper and packaging paper, to ensure that the strength of the sample depends on its surface color + + color paper this paper is a kind of special skin, which can not lose color in the sun for more than ten years under the UV light after the UV test, the heat resistance is relatively good, and after the inhibition of kraft paper and color photo paper, each foam of them is impregnated with cyanuric chloride Amine aqueous solution. Digestion and absorption of this kind of aqueous solution, its wear resistance, scratch, cleanliness, corrosion resistance, acid resistance will be much better. That is to say, in the decoration market, some double decorative panels of manufacturers are also called melamine boards or once Extruded Boards soaked with melamine board aqueous solution. The kraft paper is only thin, and the bear buffer performance index is a little poor; the water absorption of melamine board aqueous solution is poor, the wear resistance, scratch resistance and other performance indexes are slightly poor, but its leveling is very good.

　　防火板

　　Fireproof board

　　防火板不能做造型設計,這是其更加突出特點因此,富美家防火板公司小編介紹選擇防火板當時應該特別注意:更好選擇啞面,因?yàn)?國內熱壓機做或冷壓沒有很好。如果壓力不是很好，光滑的表面就很容易看出凹凸不平的瑕疵。

　　The fire-proof board can't be designed, which is its more prominent feature. Therefore, the small editor of Beijing fumeijia fire-proof board company introduced that special attention should be paid to the selection of fire-proof board at that time: it's better to choose the dumb face, because the domestic hot press or cold press is not very good. If the pressure is not good, it is easy to see uneven defects on a smooth surface.

　　二:是哪種吸塑板?吸力一般分為這三個方面:雙面、單面和有蓋框架。

　　Two: what kind of blister board is it? Suction is generally divided into these three aspects: double-sided, single-sided and covered frame.

　　單邊吸入:

　　Unilateral inhalation:

　　1,一邊吸處理技術,也就是說,整個一張塑料薄膜吸生態板,另一邊的木棍是一張紙(本文只具有一定的防水材料屬性不玩很多有用的拉力,)。假如你選擇吮吸說，一般是你喜歡它能做造型設計。但這就是現象。

　　1. One side suction treatment technology, that is to say, the whole plastic film suction ecological board, the other side of the stick is a piece of paper (this paper only has certain waterproof material properties and does not play a lot of useful pulling force). If you choose to suck, you usually like it to be able to make shape design. But this is the phenomenon.

　　2、你的標準是在表面做一個不同的形狀設計，然后你要用刀去磨出各種各樣的刃，一個銑削刃會損傷整個板的內應力。而紙張的背面實際上達不到真正的拉函數。也許兩年后不會有大問題，但經過很長一段時間后，各種各樣的問題會出現。

　　2. Your standard is to make a different shape design on the surface, and then you need to use a knife to grind out all kinds of edges. One milling edge will damage the internal stress of the whole plate. But the back of the paper can not reach the real pull function. Maybe there won't be big problems in two years, but after a long time, all kinds of problems will appear.

　　3、銑刀在切膜時的確是可以緊繃的。這與膜的延伸率有關。例如國產的膜，通常從11厘米拉伸到13厘米時問題并不多，而德國的膜，拉伸到18厘米時問題不大。因此，膜的延伸率與門框的變形率也有很大的相關性。

　　3. The milling cutter can be tightened when cutting the film. This is related to the elongation of the membrane. For example, when the film of domestic brand is stretched from 11cm to 13cm, the problem is not much. When the film of German brand is stretched to 18cm, the problem is not much. Therefore, the elongation of the film and the deformation rate of the door frame also have a great correlation.

　　雙重吸入:

　　Double inhalation:

　　雙面吸塑要好得多，因?yàn)樗芰媳∧さ谋趁婧驼娑际峭瑯拥暮穸?，氣體壓力和環境溫度是相似的，因?yàn)閮烧叨急晃赵谝黄?。即使在前面的建模設計中，從所有的相互作用和內部應力水平來分析應力誤差也不是很大。如果是7年，9年也不是什么大問題。

　　Double sided blister is much better, because the back and front of the plastic film are the same thickness, gas pressure and ambient temperature are similar, because both are absorbed together. Even in the previous modeling design, the analysis of stress error from all interaction and internal stress levels is not very large. If it's seven years, nine years is not a big problem.

　　涂布框:

　　Coating frame:

　　它和同樣糟糕的東西是一樣的。它的特點是四個框架在側面連接，不同之處在于雙面吸力，然后用兩根50*08大小的桿將相鄰的框架連接起來。中間的密度板起支撐作用。由于刨花板比密度板強度大得多，自然變形率會小得多。

　　It's the same as something as bad. Its characteristic is that four frames are connected at the side, the difference is that the double-sided suction force, and then two 50 * 08 size rods are used to connect the adjacent frames. The density board in the middle plays a supporting role. Because particleboard is much stronger than density board, the natural deformation rate will be much smaller.

　　這就是富美家防火板與吸塑板的區別，所以北京福米佳防火板在材料的選擇上一定要注意篩選。

　　This is the difference between fumeijia fire-proof board and blister board, so the selection of materials for Beijing fumeijia fire-proof board must pay attention to screening.