五月激情丁香,亚洲国产精品国自产拍久久,波多野,精品一区二区三区

山東創圖建筑裝飾工程有限公司 山東創圖建筑裝飾工程有限公司
加工技術熱線:18660816658
  • 您當前位置: 首頁>>新聞動態>>行業動態墻面裝飾板如何安裝質量更好

    行業動態

    墻面裝飾板如何安裝質量更好

    來源:http://www.qq1980.cn/ 日期:2022-10-26 發布人:admin

    很多家庭在裝修墻壁的時候都會用到墻面裝飾板,既美觀又實用。那么墻面裝飾板如何安裝質量更好呢?下面富美家裝飾板廠家為您解答。
    Many families will use wall decorative panels when decorating walls, which are both beautiful and practical. Then how to install the wall decorative board with better quality? The following Fumeijia decorative board manufacturer will answer for you.
    ①找位與彈線
    ① Locating and snapping lines
    安裝前,根據設計要求,查找立面、平面位置、彈簧線的垂直尺寸。
    Before installation, find out the vertical dimensions of elevation, plane position and spring line according to the design requirements.
    ②核查預埋件及洞口
    ② Check embedded parts and openings
    檢查預埋件,看木磚、木楔是否符合要求,門窗洞口是否垂直,與設計圖紙是否一致。
    Check the embedded parts to see whether the wood bricks and wooden wedges meet the requirements, whether the door and window openings are vertical and consistent with the design drawings.
    ③鋪、涂防潮層
    ③ Pave and coat damp proof course
    進行研究鋪設,在鋪設時骨架和木磚之間要墊木墊,每塊木磚要用2個釘子釘牢,然后裝龍骨,裝龍骨時要預留出板面大厚度。木龍骨與墻體面工作要做一些防腐技術處理,其余地區三面做防火問題處理。
    Conduct research and laying. During laying, a wooden mat shall be placed between the skeleton and the wooden bricks. Each wooden brick shall be nailed with 2 nails, and then the keel shall be installed. When installing the keel, a large thickness of the board surface shall be reserved. The wood keel and wall face work should be treated with some anti-corrosion technology, and the other areas should be treated with fire prevention on three sides.
    富美家裝飾板
    ④襯板安裝
    ④ Lining plate installation
    安裝襯板時,用釘子將襯板釘牢。另外,拼接板之間應保留約5毫米的間隙,主要是為了避免溫度變化引起的變形。
    When installing the lining plate, nail it firmly. In addition, a gap of about 5mm should be reserved between the splice plates, mainly to avoid deformation caused by temperature changes.
    ①墻面裝飾板在裝修前先進行處理以及墻面,墻面平整工作以后在施工。
    ① The wall decorative plate shall be treated before decoration and the wall surface shall be leveled before construction.
    ②如果一個墻面環境已經放在涂了白漆的話,需要將墻面上的漆類材料刮掉。
    ② If a wall environment has been painted with white paint, the paint materials on the wall should be scraped off.
    ③如果一個墻面有縫隙政府需要我們先將墻面縫隙處理好。
    ③ If there is a gap on the wall, the government needs us to deal with it first.
    ④墻面處理后,即可裝飾裝飾板。
    ④ After wall treatment, decorative panels can be decorated.
    安裝墻面裝飾板的時候,這些問題細節我們需要進行格外注意,只有這樣才能讓其施工質量更好!關注我們http://www.qq1980.cn,了解更多!
    When installing wall decorative panels, we need to pay special attention to the details of these problems. Only in this way can the construction quality be better! Follow us http://www.qq1980.cn , learn more!

    Related products相關產品

    聯系我們

    產品銷售熱線:18660816658

    技術方案咨詢:18560211715

    倉庫地址:山東省濟南市天橋區金鑫產業園303倉庫

    九江工廠:九江市江東大道3號

    臺灣新竹工廠:臺灣新竹

    泰國曼谷工廠:泰國曼谷

    關注我們
    山東創圖建筑裝飾工程有限公司 備案號:魯ICP備14019259號-2 網站地圖 XML TXT 魯公網安備37010502002020號

    截屏,微信識別二維碼

    微信號:18660816658